Heavy Duty SuperTuff Tack Back gives you superior leak resistant protection that stays where you place it. The floor protection roll consists of two layers—absorbent fiber made from a blend of post-consumer and post-industrial recycled PET and a PET film protector sheet with an aqueous pressure sensitive adhesive.
The tacky backing allows for protection of vertical and horizontal working surfaces, such as windows or counter tops. Plus, it’s easy to use and remove from hard surfaces. This heavy duty surface protector can stand up to forklifts and high traffic for an extended period of time, and therefore is ideal for a walk off mat to prevent tracking paint, mud, water, or soil into the jobsite. Reduce messy clean ups by protecting your jobsite and materials with SuperTuff Tack Back.
Be sure to explore Trimaco’s full line of heavy duty surface protectors and other protection products.
Heavy Duty SuperTuff Tack Back
|86525||4||36″ x 25′|
|86550||1||36″ x 50′|
|86510||1||36″ x 100′|
For temporary use only. Up to 60 days on surface. For use in temperatures 0-140°F. Trimaco is not responsible for adhesion issues. All adhesive products have some potential to leave residue or lift or discolor finish coatings, paint, and loose or pre-damaged tiles depending on the condition and age of the floor surface. Test in a non-critical area prior to use. Consult with flooring and/or finish manufacturer to determine if this product is suitable to use prior to curing. Not recommended for on-site finished hardwood floors, polished concrete, concrete not fully cured, limestone, or areas with heavy rain and wind. Do not apply to wet or damp surfaces. Do not use where product cannot be firmly secured to surface. Customer assumes the risk that the SuperTuff Tack Back may damage or alter customer’s existing flooring or floor covering. Trimaco provides no warranty of fitness for a particular purpose and no warranty that the use of an adhesive-backed mat will be acceptable for use in the customer’s facility. Trimaco shall have no responsibility for, and customer hereby releases and discharges Trimaco from, any direct, indirect, incidental or consequential damages to customer’s floors, flooring material, or any other surfaces. Customer is solely responsible for determining the fitness and appropriateness of the use of a Trimaco adhesive-backed product in customer’s facility. In no event will Trimaco’s aggregate liability exceed the amount paid for this product.
Calculation is based off of 36in x 50ft roll of Heavy Duty SuperTuff Tack Back. Rounded up to nearest whole roll.