How To

Canvas Dropcloth Sign

Share

DIY with Trimaco (Tri DIY with us!)

The New Year Slump: it’s that time of year that the holidays are over, families return home, decorations come down and the countdown to spring is on. But why do the fun decorations have to stop just because the calendar says so? Keep the spirit going by creating your own decorations for the new year. These simple and easy canvas dropcloth signs are the perfect decorative addition to keep that slump away!

Materials needed:

Directions:

  1. First, gather your materials and heat up the hot glue gun.
  2. Measure out and sketch your desired shape for your sign on the Trimaco Supertuff Canvas Dropcloth. In our designs, we measured the top of the banner to be roughly 12”-20” wide.
  3. Using the scissors, cut the Canvas Dropcloth along the sketched shape of your sign – but add 1″ to the edges.
  4. With the hot glue gun and the extra space along the sign, glue and fold over the edges to create a hem – repeat along all edges, except for the top.
  5. Sketch your design onto your sign with a welcoming note, or a favorite saying. We first used a pencil, and then retraced the design with fabric markers.
  6. Once your design is complete, turn the canvas over. Place the wooden rod at the top of your sign/design and glue into place. Fold over the remaining canvas and glue down to secure the rod to the sign.
  7. Cut the twine to your desired hanging length, tie and secure to both sides of the wooden rod.
  8. Hang your canvas dropcloth sign and keep the new year slump away!

Tricks we learned along the way

  1. Put down another dropcloth first, so the fabric markers do not bleed through onto the table.
  2. Wash and iron your dropcloth before cutting and designing for a clean look.
  3. Make sure your wooden rods extend all the way across the length of the canvas signs, but leave enough room to add the twine to hang.

Have a canvas drop cloth decoration or project of your own? Feel free to share below!

Susan Wilson

Recent Posts

Meet the X-Family: Same Trusted Protection, Bold New Look

In surface protection, it’s not just about how tough a product is. It’s also about…

2 weeks ago

When staining wood, use cloth rags—don’t brush!

Staining wood looks simple, but it can go wrong fast. Maybe you’ve seen streaks, dark…

1 month ago

5 Contractor‑Approved Uses for Trimaco’s Stay Put Surface Protector

When it comes to protecting surfaces on busy jobsites, pros need something tough, reliable, and…

2 months ago

Choosing the Right Paint Strainer for Your Project

When it comes to achieving a smooth, professional-quality paint finish, few tools are as underrated…

2 months ago

7 Common Contractor Mistakes in Jobsite Prep (and How to Avoid Them)

Jobsite prep is more than just a good habit. It’s non-negotiable for preventing damage. Additionally,…

4 months ago

5 Tips For Interior Painting In The Winter

When considering interior painting, many may automatically assume that it's best done during the spring…

4 months ago