{"id":11078,"date":"2017-01-18T13:24:26","date_gmt":"2017-01-18T17:24:26","guid":{"rendered":"https:\/\/trimaco.wpengine.com\/products\/protective-wear\/e-z-floorguards\/"},"modified":"2021-01-26T16:04:29","modified_gmt":"2021-01-26T20:04:29","slug":"e-z-floorguards","status":"publish","type":"page","link":"https:\/\/trimaco.com\/en-au\/products\/protective-wear\/e-z-floorguards\/","title":{"rendered":"E-Z Floor Guards\u00ae for Shoes"},"content":{"rendered":"

THE MODERN, ECONOMIC PROTECTIVE SHOE COVERING<\/h3>\n

Trimaco\u2019s E-Z Floor Guards\u00ae provides a simple and economical alternative to traditional shoe guards. This innovative protective shoe cover works by easily placing a sheet of high-quality, adhesive plastic film on the bottom of your shoe or boot to avoid tracking dirt and debris into a home or job site.
\n
\nSimply STEP, PULL and TEAR. No need to bend over and struggle to apply like traditional, disposable painter\u2019s protective shoe covers or booties. To use, first raise the unit blade on the dispenser up by sliding the up\/down button to the left. Next, pull the film out past the blade, pulling down slightly so film connects to the blade\u2019s teeth. Finally, step down onto the cushion, raise your foot slightly and pull your foot towards yourself (roughly 2 inches). Push down to force film onto the teeth of the blade until the film is cut. Our shoe covers work with any size shoe.
\n
\nGoing back outside? Don\u2019t bother removing the protective film, just reapply a new sheet of adhesive plastic film as you re-enter the job site. Unlike traditional shoe covers, you can stack new layers of E-Z Floor Guards. Keep your home or job site clean with the easy to use and economical E-Z Floor Guards. Easily refill with a new roll of film when you run low so you can easily keep your floors protected for the entire length of your project.
\n
\nLearn more about all of Trimaco\u2019s protective wear<\/a> and surface protection products<\/a>.<\/p>\n